Use This Instructions To Connect USB To A Factory Stereo
The most common way of transferring data or music files from a mobile or a mp3 to a personal computer is by using a USB cable. The cable is used to pass the data from one device to another; the data can be music files also. Though USB is very common in the personal computer but it not very common in the radio present in the car. There are only a few radios which have these USB facilities.
This article lists all the tools required to use USB in the stereo of the car and it also explains the procedure to remove the same without much difficulty. If we go for a car mechanic or an engineer they may charge heavily or doing this simple work of installing the cable for port of USB .So, doing this on our own is the right choice.
Screw driver (Philips), screw driver with flat head, USB cable, Aux cable and player are the things that we will be in need of to complete this job. We should make sure that all these things are ready before the work is started to avoid any wastage of time.
Get into the car. The audio system is switched on. If we find any media material like compact disc, cassettes in the in dash receiver of car, then it should be taken out first. Ignition engine of the car should be turned off. Hand brake is applied. Parking brake is the other term used to refer hand brake. Inspection of the stereo is done thoroughly. Locate the USB port and Aux port. The USB port is usually smaller whereas the Aux port is circular in shape. Do not get confused with the port of head phone as they both may appear nearly the same.
After this is done, the alternate current power adapter is connected to the USB cable that is in an mp3 player. This power adapter can be connected in the lighter for cigarette. If this cannot be used, it can also be connected to the power port that is especially for the alternate current of the car.
The radio is then adjusted in such a way that it finds a station that has no broadcasts. This is to ensure minimal disturbances to the player.
Two ten mm bolts which are located just below the controls of the heater are removed. Two dash vents which are present above the audio system are removed. Two ten mm bolts are removed which are already exposed. The weather controller set is pulled out carefully. Harness for wiring which is plugged to the radio at its back side is disconnected.
Thus this article throws light on How to Use USB for a Car Stereo.
Looking to find the best deal on Auto Hifi, then visit www.powernetshop.at to find the best advice on Car audio for you.
Related posts:
- An In-depth View on the Kenwood Car Stereo This brand is a household name for every car audio...
- Choosing Car Audio The primary thing which a lot of us do upon...
- Car Accessories And Gadgets That Most People Want Most drivers adore gadgets and accessories and the chances are...
- Quick And Precise Printing With The Help Of The Brother QL-570 Professional T-Shirt Printer Are you needing to print shipping labels for your small...
- The Best Kinds Of Car DVD Players Currently, there is no house with out using DVD player,...